Showing posts with label 1a. Show all posts
Showing posts with label 1a. Show all posts
Sunday, October 19, 2014
0 50V 1A Laboratory Power Supply Variable Voltage
Laboratory Power Supply – Variable voltage from 0V to 50V and variable current from 0A to 1A
Reverse engineered circuit diagram of an expensive commercial variable lab power supply. This unit is designed around an ordinary op-amp and easy to obtain parts. Although the unit uses a single transformer with two output windings the circuit works equally well using a big transformer and a little transformer.
Read More Source:http://members.shaw.ca/novotill/LabSupply50V1A/index.htm
Thank you.
Wednesday, September 17, 2014
0 To 12V 1A Variable Power Supply Wiring diagram Schematic
This 0- to 12-Vdc variable power supply uses an IC voltage regulator and a heavy-duty transformer to provide a reliable dc power supply. Looking at the schematic shown, you can sec that transformer Tl has a 120-V primary and a 28-V secondary. Filtered dc is fed to the input (pin 2) of the LM317T voltage regulator, IC, which keeps the voltage at its output constant (pin 3) regardless (within limitations) of the input voltage.
Pin 1 of the LM317T is the adjustment pin. Varying the voltage on pin 1 (via PI) varies the output voltage. Diodes D5 through D7 and LEDs LI through L3 give an approximate indication of the output voltage. Each LED/diode path has a limiting resistor to limit the current to a level that is safe for the LED.
Build a 0 To 12V, 1A Variable Power Supply Circuit Diagram
Monday, August 25, 2014
Power Supply Variable 1 3V 12 2V 1A Circuit
Power supply circuit to generate output below were variations between 1.3V DC to 12.2V DC with 1A current. In addition, the power supply circuit is also equipped with over-current protection or shield against belebih flow. Power supply circuit is very simple, but the quality is quite good, made her basiskan regulator IC LM723 is a pretty legendary.
Read more
Subscribe to:
Posts (Atom)