Showing posts with label electronic. Show all posts
Showing posts with label electronic. Show all posts

Sunday, November 2, 2014

NXP TDA3629 LIGHT POSITION CONTROLLER ELECTRONIC DIAGRAM


NXP TDA3629 LIGHT POSITION CONTROLLER ELECTRONIC DIAGRAM

schematic diagram of light position controller which is a monolithic integrated circuit often used in passenger cars. The potentiometer in the dashboard is used to define the light beam’s elevation of the car’s headlight to a state be the car driver.
Read More..

Thursday, September 4, 2014

Electronic Extended Play Wiring diagram Schematic

This is a Electronic Extended Play Circuit Diagram. A single op amp-one of four contained in the popular LM324-is operating in a variable pulse width, free-running square wave oscillator schema, with its timed output driving two transistors that control the on/ off cycle of the tape-drive motor. The Oscillator` s positive feedback path holds the secret to the successful operation of the variable on/ off timing signal. 

 Electronic Extended Play Circuit Diagram




The two diodes and pulse width potentiometer R8 allows the setting of the on and off time, without affecting the oscillator`s operating frequency. One diode allows only the discharge current to flow through it and the section of R8 that it`s connected to. The other diode, and its portion of R8, sets the charge time for the timing capacitor, C3. Since the recorder`s speed is controlled by the precise off/on timing of the oscillator, a simple voltage-regulator schema (Ql, R3, and D4) is included. 

Connecting the speed control to most cassette recorders is a simple matter of digging into the recorder and disconnecting either of theƂ· motor`s power leads, the ground or common side might be best, and connecting the recorder through a length of small, shielded ci!ble to the control schema. In some recorders, a remote input jack is furnished to remotely tum on and off the recorder. Before going in and modifying a recorder with a remote jack, try connecting the schema to the external remote input.
Read More..

Saturday, August 30, 2014

Simple Electronic Music Maker Wiring diagram Schematic

Build a Simple Electronic Music Maker Circuit Diagram. This electronic music maker uses an astable oscillator schema that is controlled by a photocell. The light falling on the photo cell controls the tone. By mounting the schema in a box, you can control light-reading PCI with your hand.

Simple Electronic Music Maker Circuit Diagram


Simple

Read More..